Fence & Deck Staining in Baton Rouge, LA

If you have a wood fence or a wood deck in Baton Rouge, you already know how fast Louisiana weather eats it alive. The sun bleaches it gray in a year, the rain soaks into it, and the humidity feeds mildew in every shaded corner. A fence that looked brand new last spring can look ten years old by the next Mardi Gras.
Here is the part most people miss: cleaning the wood is only half the job. Washing strips off the gray, the mildew, and the grime, and it looks great for about a month. Then the sun and rain start over. Staining and sealing is what actually protects the wood, and it is the natural next step after a good wash.
That is exactly what we do. Tiger Pressure Wash already cleans fences and decks all over the Greater Baton Rouge area. Now we finish the job: we wash the wood, let it dry, then stain and seal it so it stays looking good for years instead of months. One company, one crew, one call.
Our Fence & Deck Staining Services
Every staining job starts with a proper cleaning, because stain only lasts when it goes onto clean, dry wood. Here is what we offer:
- Wood fence staining. Full stain application for pine and cedar privacy fences, picket fences, and ranch rail fences. We work around landscaping and stain both sides where we can reach them.
- Deck staining. Staining for wood decks of all sizes, including the floor boards, railings, steps, and posts. We use products made for horizontal surfaces that take foot traffic and standing water.
- Fence and deck sealing. Clear and tinted sealers for wood you want to protect without changing the color much. Sealer keeps water out, which is the main thing that rots wood in Louisiana.
- Re-staining weathered wood. If your fence or deck was stained years ago and it is fading, graying, or flaking, we strip it back with a wash, prep the surface, and put down a fresh coat.
- New wood staining. Just had a new fence or deck built? Pressure treated lumber needs a few months to dry out before it will take stain. We will tell you honestly if yours is ready or if you should wait, and we will come back when the time is right.
- Stain color matching. Want to match an existing fence run, a neighbor’s fence on a shared line, or the trim on your house? Bring us a sample or point us at it and we will get as close as stain allows.
If a few boards are rotted or broken, we will point that out during the quote. Small fixes like a popped nail or a loose picket we can usually handle on the spot. Bigger carpentry work, like replacing whole sections of fence, is something we will tell you to get done first, and we will come stain after.
Who We Stain Fences and Decks For
Most of our staining work is for homeowners, but wood is wood, and plenty of properties around Baton Rouge have fences and decks that need protecting:
- Homeowners who want their fence and deck to look good and last, instead of replacing boards every few years.
- Rental property owners who are tired of curb appeal disappearing between tenants. A stained fence photographs better and holds up to neglect.
- HOAs and subdivisions with common-area fences, entrance features, or boardwalks that need to look uniform and stay maintained.
- Apartment complexes with wood fencing around the property or wooden stair and deck structures.
- Restaurants and businesses with outdoor patios, wooden deck seating areas, or decorative fencing that customers see every day.
- Churches, schools, and daycares with wooden playground borders, fences, or outdoor structures.
Our Fence & Deck Staining Process
Stain fails when the prep is rushed. We do it in the right order, every time:
- Free quote and inspection. We come look at the wood, check what shape it is in, measure it up, and give you a straight price. If the wood is too far gone to save, we will tell you that too. No point staining a fence that needs replacing.
- Wash and prep. We pressure wash the fence or deck to strip off gray weathered fibers, mildew, algae, and old failing stain. This is the step that makes or breaks the whole job. Stain sticks to clean wood and peels off dirty wood.
- Dry time. The wood has to dry before stain goes on, usually 24 to 48 hours depending on the weather. We schedule the staining visit after the wood is ready, not before. Staining damp wood traps moisture and the stain will not last.
- Sanding and detail prep. We sand rough spots, raised grain, and splinters, especially on decks where bare feet and hands touch the wood. We also protect your plants, concrete, and house siding from overspray.
- Stain application. We apply the stain with sprayers, brushes, and rollers, then back brush it into the wood so it soaks in evenly instead of sitting on top. Fence pickets get full coverage on every face we can reach.
- Second coat where it is needed. Horizontal deck boards and the tops of fence rails take the worst beating, so they often get a second pass. We do not charge extra for doing the job right.
- Final walkthrough. We walk the whole fence line or deck with you, check for missed spots or drips, and make sure you are happy before we pack up.
Stain vs. Paint: Which Is Right for Your Fence or Deck?
We get asked this a lot, so here is the honest answer. Stain soaks into the wood. Paint sits on top of it. That one difference decides everything in Louisiana.
Paint looks sharp the day it goes on, but our humidity gets under it. Once moisture works its way behind paint on a fence or deck, the paint bubbles and peels, and then you are scraping and repainting the whole thing. On horizontal deck boards that get foot traffic and standing water, paint fails even faster.
Stain does not peel because there is nothing to peel. It fades gradually over time, and when it is time to redo it, you wash and re-stain. No scraping, no peeling mess. For fences and decks in Baton Rouge, stain wins in almost every case. The one exception is if you want a solid bold color, like a white picket fence or a black modern fence, where a solid stain or a quality exterior paint is the only way to get that look. We will talk through it with you at the quote.
How Long Does Stain Last in Louisiana Weather?
Straight answer: on a fence, a good stain job lasts about 3 to 4 years here. On a deck floor, plan on 2 to 3 years, because horizontal boards take direct sun, rain, and foot traffic all at once. Fence pickets and deck railings last longer than deck floors because water runs off them instead of sitting on them.
A few things move that number up or down. Darker, more solid stains last longer than clear or transparent ones because the pigment itself blocks UV rays. A fence that sits in full sun all day will fade faster than one shaded by trees (though shaded wood grows more mildew, so it is a trade). And the quality of the prep matters more than the brand on the can. Stain on properly washed and dried wood lasts. Stain on dirty or damp wood does not, no matter what the label promises.
Compare that to doing nothing: an unstained pine fence in Baton Rouge starts graying in under a year and starts losing boards to rot in 5 to 7. Staining roughly doubles the life of the wood. When a new fence costs thousands of dollars, a few hundred for stain every few years is cheap insurance.
Signs Your Fence or Deck Needs Staining
You do not need to guess. Wood tells you when it is thirsty:
- It has turned gray or silvery. That is UV damage. The wood fibers on the surface are dead, and water is soaking straight in.
- Water soaks in instead of beading up. Splash some water on it. If it beads, the old sealer is still working. If it darkens and soaks in within seconds, the protection is gone.
- Splinters are popping up on the deck. Dried out wood splits and splinters. Stain and sealer keep the moisture balance in the wood so it stays smooth.
- The old stain is flaking or patchy. Some areas dark, some areas gray. Time for a wash and a fresh coat before it gets worse.
- Green or black mildew keeps coming back. Mildew loves unprotected wood in our humidity. Sealed wood still needs washing now and then, but it does not feed mildew the way raw wood does.
- Boards are starting to cup or warp. That is water getting in unevenly. Stain will not fix boards that are already badly warped, but it slows the process on the rest.
- You just had it pressure washed and it looks great. That is actually the perfect time. Clean, bare wood is ready for stain, and staining right after washing locks in that fresh look.
Fence & Deck Staining Service Area
We stain fences and decks all across the Greater Baton Rouge area, including Baton Rouge, Prairieville, Gonzales, Denham Springs, Zachary, Central, Walker, Livingston, Baker, Port Allen, Plaquemine, St. Francisville, Brusly, Hammond, Watson, Geismar, and Dutchtown. If you are close to one of those towns, give us a call and we will let you know if we can get to you.
What Affects the Cost of Fence & Deck Staining
Every quote is different, but the price always comes down to a few honest factors. Here is what we look at when we price your job:
- Size. Fences are priced by linear foot, decks by square foot. A 150 foot privacy fence and a 400 square foot deck are simply different jobs.
- Condition of the wood. A fence that was stained three years ago and just needs a refresh is quick. A fence that has gone gray and never been sealed takes more washing, more sanding, and sometimes a brightening treatment before it will take stain evenly.
- Old finish removal. If the old stain or paint is peeling badly, it has to come off before the new coat goes on. That is real labor and it shows up in the price.
- Type of stain. Transparent stains cost less per gallon than heavy solid stains, and premium products with better UV blockers cost more than builder grade cans. We will show you the options and what each one buys you in lifespan.
- Access. A fence with a clear shot down both sides goes fast. A fence buried behind overgrown landscaping, or a deck packed with furniture we have to work around, takes longer.
- Height and detail. A standard six foot privacy fence is straightforward. Taller fences, lattice tops, and decks with lots of railings and spindles take more time because every face has to be coated.
What you will not see on our quotes: surprise add ons. The price we give you covers the wash, the prep, the stain, and the walkthrough. If we find something unexpected once we start, like rotted boards that need replacing first, we stop and talk to you before spending your money.
Best Time of Year to Stain in Louisiana
You can stain most of the year here, but some months are easier than others. Fall (October through December) is the sweet spot: mild temperatures, lower humidity, and the stain cures at a comfortable pace. Spring (March through May) is the second best window, though you have to dodge the rainy stretches.
Summer works, but we start early to beat the heat. Stain applied to wood that is baking at 100 degrees in direct sun can dry too fast and not soak in properly, so we plan around it. Winter is fine as long as we get a dry stretch with temperatures above 50 degrees, which in Baton Rouge is most of the season.
The one rule that matters more than the calendar: the wood has to be dry, and no rain in the forecast for 24 hours after we stain. We watch the weather and schedule accordingly. If a storm pops up, we would rather reschedule than stain into rain.
Why Tiger Pressure Wash for Staining
Plenty of companies stain wood. Here is why our customers pick us: we are the same crew that washes it. Most staining jobs fail at the prep stage because the painter is not a washer and the washer is not a stainer. We are both, so the wash is done to staining standards and the stain goes onto wood we prepared ourselves. One call, one crew, one company accountable for the whole thing.
We are also local. We live here, we work here, and our reputation is on every fence line we stain. When you call (225) 284-4527, you talk to the people who will actually show up at your house.
Fence & Deck Staining FAQs
Do you have to pressure wash before staining?
Yes, and do not let anyone skip it. Stain needs clean wood to soak into. If you stain over gray dead fibers, mildew, or dirt, the stain bonds to the grime instead of the wood, and it starts failing within a year. Our wash and stain service is built as one job for exactly this reason.
How long does a fence or deck staining job take?
Most residential fences take one day to wash and one day to stain, with a day or two of dry time in between. An average deck is about the same. Bigger jobs or jobs with a lot of sanding can run longer. We will give you a real timeline at the quote, not a guess.
Can you stain over old stain or paint?
Over old stain, usually yes, as long as it is not peeling badly. We wash it, prep it, and apply a compatible stain. Over old paint, it depends. If the paint is holding tight, stain will not soak through it, so we would either paint over the paint or strip it first. We will look at it and tell you which route makes sense.
What stain colors do you offer?
We work with the full range, from clear and natural tones that show the wood grain, to semi transparent cedar and redwood tones, to solid colors that look almost like paint. We will bring color charts to the quote so you can see them against your actual wood in daylight, which is the only way to pick honestly.
How long before we can use the deck after staining?
Light foot traffic is usually fine after 24 hours. Give it 48 to 72 hours before you drag the grill back out or put heavy furniture on it. In our humidity, stain takes a little longer to fully cure than the can says, so we always tell people to give it the extra day.
Can you stain a brand new fence or deck?
Yes, but not right away. Pressure treated lumber comes from the yard soaked with treatment chemicals and water. It needs 2 to 4 months of drying in our climate before it will absorb stain properly. If we stain it too soon, the stain sits on wet wood and fails early. We will test the wood and tell you straight whether it is ready or needs more time.
Get a Free Fence & Deck Staining Quote
Your fence or deck was a big investment. A wash and stain every few years is what keeps it from turning into a replacement project. Call or text (225) 284-4527 for a free quote, or fill out our free quote form and we will get back to you fast.